Flanged reducer

Detailed Product Description

We manufacture and supply ductile iron pipe fabrications from 80mm-1200mm. We supply all sizes possible from short double spigots to longer double flanged pipes. All our pipework is available in BS EN545 blue and BS EN598 red.

1The use of the products and performanceNot only does ductile iron have high tensile strength and percentage elongation,but also have fine ductility and other excellent as anti-high-compression,

Anti-oxidation,anti-corrosion,etc.so the ductile iron pipe fittings are widely applied to such compressive pipes as water pipeline.oil pipeline,gas pipeline,sand pipeline,sewerage pipeline etc

1, Standards: ISO2531, ISO4422, EN545, EN598, BS4772, AWWA C110
2, Material: GGG500-7 or other ductile iron
3, Coating: fusion bonded epoxy coating; cement lining inside, zinc primer and bitumen
painting outside; bitumen painting inside and outside; red anti-rust coating
4, Packing: wooden cases with plastic layer, wooden pallets with plastic layer, steel
crates
5, Accessories: gaskets, bolts and nuts available upon request
6, Flanged pipe fittings, push-on Tyton socket fittings, ductile iron/PVC fittings,

4.Product Mechanical:Tensile strength>420mpa

                  Elongation>5%

                  Hardness<250HB

                  Proof Stress>300map

5.Product Microscopic Structure:ferrite+little pearlite grades of ductile lron>grade three(GB9941-88)

6.Type of joint:

.Push-on joint(Ttype) including Spigot end,EPDM&SBR rubber gasket,Anti-corrosive layer

Mechanical joint(Ktype)including spigot end,rubber gasket,anti-forrosive layer,T-bolts&nuts

  Socket end

,flange joint(flange type)including flanged fittings,rubber gasket,flange-bolts&nuts.

7.Hydrostatic Test Pressure

 Diameter:DN50-300   fittings 25 bar

 Diameter:DN350-800  fittings 16 bar

8.flanged drilling standards:PN10&PN16&PN25&PN40,AWWA C110.

9. Surface treatmentfitting Internal epoxy powder coating External pink resin paint.Black Bitumen Coated or Blue Fusion Bonded Epoxy Coated as specified.

10.Internal lining: Cement Mortar Lined according to ISO 4179

11. Packing:Wooden pallets or wooden cases

K type bolted gland fittings, AWWA C110 flanged pipe fittings

Materials:	Steel, cast/ductile iron, stainless steel, concrete, asbestos cement, plastic, GRP and others.
Pipelines:	Onshore, offshore, transmission, distribution, water/waste water, plant piping, refinery, chemical plants, steel mills, power plants, steam lines, cooling systems and others.
Specs:	Designed and manufactured under ISO 9001:2000 WRC, WBS approved materials and coatings. Other coatings and rubber compounds available to suit a wide range of applications.